nvseismolab doesn't have a bio yet.
By: nvseismolab, 10:42 PM GMT on April 09, 2014
Added Barometric Pressure Sensor to the Control By Web X320-M weather station (Port Analog4).
Sensor is a Apogee: SB-100 55 bucks!
Sensor installed inside of outdoor enclosure that is weather tight but not air tight. Powered by 5VDC terminal on the X320-M.
Next up ... Soil Moisture sensor.
By: nvseismolab, 3:22 PM GMT on April 06, 2014
Hardware installed. Davis Sensor Suite with Rain bucket, Wind Speed Wind Dir, Temperature, Humidity and Solar Radiation. Yes, the Temp is solar powered fan aspirated. Hacked the min solar panel kit so both panels can drive the fan so it stays spinning longer in low light.
Still need Bar Pressure sensor as well as UV, Soil Moisture (LFM proxy) and dry fuel monitor eventually :)
Did not get the Davis weather station with IP link. Saw it, don'...
The views of the author are his/her own and do not necessarily represent the position of The Weather Company or its parent, IBM.